Hopefully, there won’t be a break-in, but how can you be sure your alarm is working if you don’t use it? One aspect of owning an alarm system that most people ignore is knowing how to test it, but that doesn’t make it any less crucial. You should test your system once a month, according to the advice. To properly test your alarm system, adhere to these instructions.
Check for Internal Signals
Checking internal signals is the first step in checking your Home Security houston. Internal signals are sent inside your house or place of business between sensors and your control panel. It is advised that you test your alarm system once per month or after making any changes that might affect how well it works, such as alterations, renovations, phone or internet changes, or after receiving professional assistance.
Note: Because every alarm system is unique, you should read your owner’s manual before beginning the test.
1. Put your computer in “Ready” mode.
Making sure your system is in “ready” mode is the first stage in the testing procedure because you don’t want your alarm to alert emergency personnel. Avoid arming it!
Set the chime to “on” to sound when the system trips a sensor. You won’t have to constantly move back and forth between the control panel and the sensor you’re evaluating to determine whether it’s functioning properly. The time it takes to test the complete system will be reduced, especially if you have a lot of sensors.
2. Test the sensors
You must examine each sensor separately to ensure that it is functioning properly. Make sure that no sensors are currently tripped before you begin checking them. If any sensors are engaged, your console should be able to let you know about it.
Go to each sensor individually and trip them. If your system is configured to chime, you should hear a noise that signifies the sensor is functional. If not, go to the console and make sure the sensor you’re checking is showing as activated there. Move on to the next sensor after resetting this one. It’s crucial to test each sensor on your site, including all of the following:
- window and door sensors
- motion detectors
- acoustic sensors
As you check each sensor separately, repeat the process for all of the sensors. Even though it could take some time, it will be worth it once you are confident that your system is protected and operating properly. When you’re done, remember to switch off the chime at the console (unless you like hearing it whenever a door or window is opened).
3. Record any failures that occur.
Make a note of which sensor failed if that happens (s). Since most properties have dozens of sensors, it might be challenging to recall which ones are malfunctioning. Call your security supplier to get your Home Security austin system serviced and inform them of your discovery.
Service for Alarm Systems from Zion Security
It is much preferable to invest the time and effort to test your alarm system once a month than to discover problems the hard way. In addition, you may feel confident knowing your system is working properly and that your property is secure by routinely reviewing your internal and external alarm signals.
Zion Security is available to help you if you have any queries about maintaining your system or require a professional service. For a free, no-obligation quote or with any queries, get in touch with us right away.